Super Heavy Duty Pneumatic Drilling Machine

Two permanent magnetic bases, pneumatic motor and no. 5 Morse Taper spindle make this machine one of the most powerful portable magnetic drills on the market. Designed for outdoor or indoor work, Offshore, Minining, Power, Ship Building, Maintenance, etc.

Motor power
3650 W

Motor speed
(Under load) 20, 80 rpm

130 Kg

Core drill
max. Ø 200 mm

Twist drill
max. Ø 45 mm

Thread Cutting
max. M48

Depth of cut
max. 100 mm

400 mm

Magnetic clamping
2 x 15000 N
(25mm, ra=1,25)


Supply Format
Magnetic base drilling
4 mm Hex Wrench
5 mm Hex Wrench
6 mm Hex Wrench
3 feed levers
8 mm Hex Wrench
Cooling system 51
10 mm Hex Wrench
Chip Guard
13 mm flat Wrench
Drift for MT5
Operator's Manual (English)

  Core Drilling up to 200mm
  Twist Drills up to 45mm
  up to M48
  can be used on pipes of 950mm diameter and above
Working on contour surfaces
  Base with permanent magnets can be adapted to a workpiece curvature
Permanent magnets need no power supply from the mains.
  A self-locking device prevents any possible accidental movement of the handle & deactivation of the magnet
Safety features
  Clamping base incorporates cross slide system for precise hole center locations. Both 44mm longitudinal & cross travel

•  Mumbai  •  Delhi  •  Chennai  •  Hyderabad  •  Vadodara 
•  Jamnagar  •  Raipur  •  Bengaluru  •  Trichy  
•  Coimbatore  • Cuttack • Kochi • Vasai • Ahmedabad

Broachcutter® is a registered trademark owned by Pioneer Intertrade Pvt. Ltd